| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Doba gelace |
|---|---|---|---|---|---|
| VEROPAL 560-T17M | Repairing epoxy system for indoor applications. Component A with wollastonite filler and component B without filler. | A/B | 100/14 | 80-95 | 10-20/5-10 |
| VEROPAL T520-T17M | Fixation thixotropic epoxy system for indoor applications. Component A and B without filler. | A/B | 100/34 | 90-110 | 10-20/5-10 |
| E-pasta LG 5G-BA | Signal green | ||||
| E-pasta GN-M-BA | Fern green | ||||
| E-pasta BFO 130M-BA | Vermilion |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Pot-life |
|---|---|---|---|---|---|
| CHS-EPODUR® 520-1787 | Epoxy resin and special hardener with low tendency to crystalize. Preferred for high and medium voltage applications. | A/B/C1/D1 | 100/90/0,5/5/360 //4 | 105-115 | 1-2 h/80°C |
CHS-EPODUR® 494-1667 | Modified epoxy resin and hardener system suitable for high and medium voltage applications. “REACH free”. | A/B/C2/D2 | 100/85/0,8/4/405 //4 | 100-115 | 2 h/60°C |
| CHS-EPODUR® 494-1667 | Modified epoxy resin and hardener system suitable for high and medium voltage applications. “REACH free”. | A/B/C2 | 100/77,5/0,8/345 //4 | 110-125 | 2 h/60°C |
| CHS-EPODUR® 505-1577 | Modified epoxy resin and hardener system suitable for high and medium voltage applications. | A/B/C2/D2 | 100/80/0,8/4/385 //4 | 100-115 | 45 min/80°C; 6 h/60°C |
| CHS-EPODUR® 494-1717 | Modified epoxy resin and special hardener with low tendency to crystalize. System with very good toughness. | A/B | 100/81/323 //4 | 95–105 | 1-2 h/80°C |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Pot-life |
|---|---|---|---|---|---|
| CHS-EPODUR® 531-1787 | Modified epoxy resin and special hardener with low tendency to crystalize. System with very good toughness and higher degree of filling. | A/B/C1/D1 | 100/85/0,5/10/370 //4 | 70-85 | 1-2 h/80°C |
| CHS-EPODUR® 494-1667 | Modified resin and hardener system. High degree of filling. “REACH free”. | A/B/C2/D4 | 100/85/0,6/17/385 //4 | 60-75 | 1-2 h/80°C |
| CHS-EPODUR® 494-1718 | Modified epoxy resin and special hardener with low tendency to crystalize. System with very good toughness. | A/B/D1 | 100/77/5/340 //4 | 85-95 | 1-2 h/80°C |
| CHS-EPODUR® 464-1657 | Modified resin and hardener system. High degree of filling. “REACH free”. | A/B | 100/75/389 //4 | 80-90 | 1-2 h/80°C |
| CHS-EPODUR® 494-1737 | Modified epoxy resin and special hardener with low tendency to crystalize. System with very good toughness and longer pot-life. | A/B | 100/81/280 //4 | 90-105 | 2 h/80°C |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Pot-life |
|---|---|---|---|---|---|
| CHS-EPODUR® 560-1577 | Cycloaliphatic resin and hardener system with very good UV resistance. High Tg. | A/B/C2 | 100/90/0,5/370 //4 | 105-115 | 2 h/60°C |
| CHS-EPODUR® 560-1987 | Cycloaliphatic resin and modified hardener system with very good UV resistance. | A/B/C1 | 100/90/0,5/360 //4 | 90-100 | 1-2 h/60 °C |
| CHS-EPODUR® 560-1987 | Cycloaliphatic resin and modified hardener system with very good UV resistance. Improved toughness. | A/B/C1/D1 | 100/90/0,5/10/370 //4 | 80-90 | 1-2 h/60°C |
| CHS-EPODUR® 560-1787 | Cycloaliphatic resin and modified hardener system with very good UV resistance. Excellent toughness. | A/B/C2 | 100/90/0,4/375 //4 | 80-90 | 1-2 h/60°C |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Pot-life |
|---|---|---|---|---|---|
| SADURIT® 520-1988 | Excellent crack resistance at low temperatures, good toughness. UL 94 HB. High Tg. | A/B | 100/100 | 110-125 | 8 h/40°C; 2-3 h/60°C |
| SADURIT® 520-1987 | UL 94 V0. High Tg. | A/B | 100/100 | 120-130 | 6 h/40°C; 1-2 h/60 °C |
| SADURIT® 494-1667 | Excellent crack resistance at low temperatures, good toughness. UL 94 HB. “REACH free”. | A/B | 100/85 | 60-70 | 6 h/40°C; 2-3 h/60°C |
| SADURIT® 560-1987 | Cycloaliphatic resin for outdoor application. Excellent crack resistance at low temperatures, good toughness. UL 94 HB. | A/B | 100/100 | 80-90 | 6 h/40°C; 1-2 h/60°C |
| SADURIT® 520-1667 HV | Room temperature cured modified resin system, long potlife. Two component with prefilled component A. Longer pot life. | A/B | 100/100 | 120-130 | 6 h/40°C; 1-2 h/60°C |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Pot-life |
|---|---|---|---|---|---|
| SADURIT® 531-0522 | Room temperature cured modified resin system, long potlife. Two component with prefilled component A. Longer pot life. | A/B | 100/13 | 100-110 | 2 h/25°C/1 000 g |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Pot-life |
|---|---|---|---|---|---|
| VEROPAL 520-1668 | Prefilled – 2K system with prefilled hardener. Low viscosity system. Excellent crack resistance. “REACH free”. | A/B | 100/220 | 95-110 | 4 h/60°C |
| CHS-EPODUR® 520-1997 | Epoxy resin and special hardener with high Tg. | A/B/C3 | 100/95/0,5/350 //4 | 165-175 | 4 h/60°C |
| VEROPAL 520-1987 | Prefilled – 2K system with prefilled hardener. Low viscosity system. | A/B | 100/220 | 95-110 | 4 h/60°C |
| Produkt | Popis | Mísící poměr | Tg, DSC | Pot-life | Shear strength |
|---|---|---|---|---|---|
| VEROBOND® 520-2608 | Structural adhesive with high elongation up to 55% and with excellent peel and shear strength. | 100/140 | 70-80 | 20 min/25°C/50g | 20-25 |
| VEROBOND® QUICK | Unique, very fast epoxy adhesive (5 minutes curing time). | 100/100 | 50-60 | 3 min/25°C/10g | 10-Dec |
| VEROBOND® SUPER | Two-component epoxy structural adhesive with high elongation up to 55% and excellent mechanical properties – peel strength and shear strength. Prefilled. | 100/100 | 70-80 | 20 min/25°C/10g | 20-24 |
| VEROBOND® 14 | Epoxy thixotropic adhesive or casting systems, cured at room temperature. System with high strength with good chemical resistance. Prefilled. | 100/50 | 80-85 | 60 min/25°C/100g | 20-24 |
| VEROBOND® 15 | Unique hybrid epoxy 2-component structural adhesive with high elongation and excellent mechanical properties – peel strength and shear strength. Prefilled. | 100/100 | 60-70 | 25 min/25°C/100g | 20-24 |
| Produkt | Popis | Aplikace | Barva |
|---|---|---|---|
| E-pasta KRBF 4478-OD | Grafite gray | indoor | RAL7024 |
| E-pasta HB 550-BA | Ultramarine blue | indoor | RAL5002 |
| E-pasta LG 5G-BA | Signal green | indoor | RAL6032 |
| E-pasta GN-M-BA | Fern green | indoor | RAL6025 |
| E-pasta BFO 130M-BA | Vermilion | indoor | RAL2002 |
| Produkt | Popis | Komponenty | Mísící poměr | Tg, DSC | Doba gelace |
|---|---|---|---|---|---|
| VEROPAL 560-T17M | Repairing epoxy system for indoor applications. Component A with wollastonite filler and component B without filler. | A/B | 100/14 | 80-95 | 10-20/5-10 |
| VEROPAL T520-T17M | Fixation thixotropic epoxy system for indoor applications. Component A and B without filler. | A/B | 100/34 | 90-110 | 10-20/5-10 |
| VEROPAL 520-T17M | Repairing epoxy system for indoor applications. Component A with common filler and component B without filler. | A/B | 100/17 | 90-110 | 10-20/5-10 |
| Produkt | Popis | Koncentrace | Koncentrace voln. chloru Cl2 | Koncentrace SO4 2 | Vyžíhaný odparek | Chlorované uhlovodíky |
|---|---|---|---|---|---|---|
| Kyselina chlorovodíková | Čirá, bezbarvá kapalina s nažloutlým odstínem a charakteristickým štiplavým zápachem. | > 31 | < 0,01 | < 0,04 | < 0,1 | < 0,0025 |
| Produkt | Popis | Koncentrace | Koncentrace voln. chloru Cl2 | Koncentrace SO4 2 | Vyžíhaný odparek | Chlorované uhlovodíky |
|---|---|---|---|---|---|---|
| Kyselina chlorovodíková | Čirá, bezbarvá kapalina s nažloutlým odstínem a charakteristickým štiplavým zápachem. | > 31 | < 0,01 | < 0,04 | < 0,1 | < 0,0025 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (Gardner) |
|---|---|---|---|---|---|---|---|
| CHS-EPOXY® B 201 M 80 | 80% solution of brominated (21% wt.) medium molecular weight epoxy resin, dissolved in methyl ethyl ketone | Prepregs for printed circuits boards, laminates, UV blocking | 1,5-2 | 2,3-2,5 | 400-435 | max. 0,1 | max.1 |
| CHS-EPOXY® B 200 M 80 | 80% solution of brominated (21% wt.) medium molecular weight epoxy resin, dissolved in methyl ethyl ketone | Prepregs for printed circuits boards, laminates | 1,1-2,3 | 1,8-2,3 | 435-556 | max. 0,1 | max.1 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (Gardner) |
|---|---|---|---|---|---|---|---|
| CHS-EPOXY® B 201 M 80 | 80% solution of brominated (21% wt.) medium molecular weight epoxy resin, dissolved in methyl ethyl ketone | Prepregs for printed circuits boards, laminates, UV blocking | 1,5-2 | 2,3-2,5 | 400-435 | max. 0,1 | max.1 |
| CHS-EPOXY® B 200 M 80 | 80% solution of brominated (21% wt.) medium molecular weight epoxy resin, dissolved in methyl ethyl ketone | Prepregs for printed circuits boards, laminates | 1,1-2,3 | 1,8-2,3 | 435-556 | max. 0,1 | max.1 |
| Produkt | Popis | Aplikace | Viskozita (mPa) | Epoxidový index | Snadno zmýd. chlor | Barva (Gardner) |
|---|---|---|---|---|---|---|
| CHS-EPOXY® RR 800 | 1, 4-butanediol diglycidyl ether | Excellent reactivity at low temperatures and good solvent resistance, high mechanical strength, limited acid resistance | Oct-25 | 7,60-8,10 | max. 0,2 | max.1* |
| CHS-EPOXY® RR 300 | Polypropyleneglycol diglycidyl ether | Flexibilizer, low toxicity and vapour pressure, reduced reactivity, limited diluting power | 40-90 | 2,90-3,30 | max. 0,3 | max.2* |
| CHS-EPOXY® RR 330 | C12-C14 alkyl glycidyl ether | Low toxicity and vapour pressure, good diluting power, reduced reactivity | 5-Oct | 2,94-3,70 | max. 0,1 | max.1* |
| CHS-EPOXY® RR 430 | C8-C10 alkyl glycidyl ether | Low toxicity and vapour pressure, good diluting power, reduced reactivity | 1-Jun | 4,25-4,55 | max. 0,05 | max.1* |
| CHS-EPOXY® RR 690 | Trimethylol propane triglycidyl ether | Excellent mechanical strength and reactivity, hot water and solvent resistance, limited diluting power | 130-200 | 7,20-7,70 | max. 0,1 | max.1* |
| Produkt | Popis | Aplikace | Viskozita (mPa) | Epoxidový index | Snadno zmýd. chlor | Barva (Gardner) |
|---|---|---|---|---|---|---|
| CHS-EPOXY® RR 800 | 1, 4-butanediol diglycidyl ether | Excellent reactivity at low temperatures and good solvent resistance, high mechanical strength, limited acid resistance | Oct-25 | 7,60-8,10 | max. 0,2 | max.1* |
| CHS-EPOXY® RR 300 | Polypropyleneglycol diglycidyl ether | Flexibilizer, low toxicity and vapour pressure, reduced reactivity, limited diluting power | 40-90 | 2,90-3,30 | max. 0,3 | max.2* |
| CHS-EPOXY® RR 330 | C12-C14 alkyl glycidyl ether | Low toxicity and vapour pressure, good diluting power, reduced reactivity | 5-Oct | 2,94-3,70 | max. 0,1 | max.1* |
| CHS-EPOXY® RR 430 | C8-C10 alkyl glycidyl ether | Low toxicity and vapour pressure, good diluting power, reduced reactivity | 1-Jun | 4,25-4,55 | max. 0,05 | max.1* |
| CHS-EPOXY® RR 690 | Trimethylol propane triglycidyl ether | Excellent mechanical strength and reactivity, hot water and solvent resistance, limited diluting power | 130-200 | 7,20-7,70 | max. 0,1 | max.1* |
| Produkt | Popis | Aplikace | Viskozita (mPa) | Aminové číslo | HEW |
|---|---|---|---|---|---|
| TELALIT® 0590 | Polyoxyetheramine | Composites, long pot life | 5-Oct | 440-490 | 59 |
| TELALIT® 0600 | Cycloaliphatic, modified | High performance composites, long pot life, highest Tg | 80-100 | 450-500 | 62 |
| TELALIT® 0842 | Solvent free system, under water curing | Hardening in wet conditions, applicable in different weather conditions. | 1 100-1 900 | min.290 | 84 |
| TELALIT® 0903 | Cycloaliphatic adduct modified | Self-levelling flooring, nonylphenol free, low yellowing | 200-500 | 320-350 | 90 |
| TELALIT® 1040 | Polyoxyetheramine | Waterborne coatings, high solid coatings, nonylphenol free. | Oct-30 | 230-260 | 104 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | Barva (Gardner) |
|---|---|---|---|---|---|
| CHS-EPOXY® 560 | Hexahydrophthalic acid diglycidyl ester | Outdoor transformers, insulators, bushings etc. | 0,5-1,3 | 5,50-6,10 | max.1 |
| CHS-EPOXY® 301 | BPA type semisolid epoxy resin | Hot casting, solventborne coatings, prepregs | - | 2,7-3,3 | |
| CHS-EPOXY® 411 | BPA type semisolid epoxy resin | Hot casting, solventborne coatings, prepregs | 0,5-0,8 //1 | 3,9-4,2 | |
| CHS-EPOXY® 530 | BPA type | Modifications, adhesives, composites | 8,0-10,0 | 5,38-5,68 | |
| CHS-EPOXY® 590 | BPF type | Modifications, adhesives, composites | 3,0-5,5 | 5,70-6,06 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (APHA) |
|---|---|---|---|---|---|---|---|
| CHS-EPOXY® 530 | BPA type | Modifications, adhesives, composites | 8,0-10,0 | 5,38-5,68 | 176-186 | max. 0,03 | max.100 |
| CHS-EPOXY® 590 | BPF type | Modifications, adhesives, composites | 3,0-5,5 | 5,70-6,06 | 165-175 | max. 0,03 | max.100 |
| CHS-EPOXY® 510 | BPA type, low tendency to crystallize | Modifications, adhesives, composites | 12,5-16,0 | 5,18-5,46 | 183-193 | max. 0,03 | max.200 |
| CHS-EPOXY® 520 | BPA type | Modifications, adhesives, composites | 12,0-14,5 | 5,21-5,50 | 182-192 | max. 0,03 | max.100 |
| CHS-EPOXY® 525 | BPA type | Modifications, adhesives, composites | 10,0-12,0 | 5,29-5,59 | 179-189 | max. 0,03 | max.100 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Barva (APHA) |
|---|---|---|---|---|---|---|
| CHS-EPOXY® 301 | BPA type semisolid epoxy resin | Hot casting, solventborne coatings, prepregs | - | 2,7-3,3 | 300-370 | - |
| CHS-EPOXY® 411 | BPA type semisolid epoxy resin | Hot casting, solventborne coatings, prepregs | 0,5-0,8 //1 | 3,9-4,2 | 238-256 | max.100 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | Barva (Gardner) |
|---|---|---|---|---|---|
| CHS-EPOXY® 560 | Hexahydrophthalic acid diglycidyl ester | Outdoor transformers, insulators, bushings etc. | 0,5-1,3 | 5,50-6,10 | max.1 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (APHA) |
|---|---|---|---|---|---|---|---|
ENVIPOXY® 510 | BPA type, low tendency to crystallize | Modifications, adhesives, composites | 12,5-16,0 | 5,18-5,46 | 183-193 | max. 0,03 | max.200 |
| ENVIPOXY® 520 | BPA type | Modifications, adhesives, composites | 12,0-14,5 | 5,21-5,50 | 182-192 | max. 0,03 | max.100 |
| ENVIPOXY® 525 | BPA type | Modifications, adhesives, composites | 10,0-12,0 | 5,29-5,59 | 179-189 | max. 0,03 | max.100 |
| ENVIPOXY® 530 | BPA type | Modifications, adhesives, composites | 8,0-10,0 | 5,38-5,68 | 176-186 | max. 0,03 | max.100 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (APHA) |
|---|---|---|---|---|---|---|---|
| CHS-EPOXY® 573 | BPA/F epoxy resin | Coatings, penetrants, filled systems, casting applications and insulating materials | 8,0-10,5 | 5,3-5,6 | 179-189 | max. 0,03 | max.100 |
| CHS-EPOXY® 572 | BPA/F epoxy resin | Coatings, penetrants, filled systems, casting applications and insulating materials | 4,5-7,0 | 5,5-5,8 | 172-182 | max. 0,03 | max.100 |
| CHS-EPOXY® 514 | BPA/F resin modified by monofunctional reactive diluent | Composites, high solid, anticorrosion paints, civil engineering, casting | 0,8-1,1 | 5,1-5,4 | 185-196 | max. 0,1 | max.100 |
| CHS-EPOXY® 571 | BPA/F epoxy resin | Coatings, penetrants, filled systems, casting applications and insulating materials | 6,0-8,0 | 5,4-5,7 | 175-185 | max. 0,03 | max.100 |
| CHS-EPOXY® 200 M 75 | Solution in methylethylketone | Production of prepreges | 0-2,0 | 1,9-2,3 | 435-525 | max. 0,015 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (APHA) |
|---|---|---|---|---|---|---|---|
| CHS-EPOXY® 573 | BPA/F epoxy resin | Coatings, penetrants, filled systems, casting applications and insulating materials | 8,0-10,5 | 5,3-5,6 | 179-189 | max. 0,03 | max.100 |
| CHS-EPOXY® 514 | BPA/F resin modified by monofunctional reactive diluent | Composites, high solid, anticorrosion paints, civil engineering, casting | 0,8-1,1 | 5,1-5,4 | 185-196 | max. 0,1 | max.100 |
| CHS-EPOXY® 571 | BPA/F epoxy resin | Coatings, penetrants, filled systems, casting applications and insulating materials | 6,0-8,0 | 5,4-5,7 | 175-185 | max. 0,03 | max.100 |
| CHS-EPOXY® 572 | BPA/F epoxy resin | Coatings, penetrants, filled systems, casting applications and insulating materials | 4,5-7,0 | 5,5-5,8 | 172-182 | max. 0,03 | max.100 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Snadno zmýd. chlor | Barva (Gardner) |
|---|---|---|---|---|---|---|---|
| CHS-EPOXY® 200 M 75 | Solution in methylethylketone | Production of prepreges | 0-2,0 | 1,9-2,3 | 435-525 | max. 0,015 | max.1 |
| CHS-EPOXY® 200 M 80 | Solution in methylethylketone | Production of prepreges | 2,5-5,5 | 2,0-2,4 | 410-500 | max. 0,015 | max.1 |
| CHS-EPOXY® 520 M 80 | 80% solution in methylethylketone | High solid coatings, prepregs etc. | 0,04-0,05 | 4,1-4,4 //3 | 227-244 //3 |
| Produkt | Popis | Aplikace | Viskozita (Pa) | Epoxidový index | EEW | Barva (APHA) |
|---|---|---|---|---|---|---|
| CHS-EPOXY® 582 | Epoxy resin modified with bi-functional reactive diluent | Casting, composites, polymer concretes and mortans | 0,64-0,72 | 5,8-6,1 | 165-173 | max.100 |
| CHS-EPOXY® 324 | Epoxy resin modified with a non-phthalate, non-reactive plasticizer | Adhesives for metals, wood, ceramics | 20,0-60,0 | 3,0-3,4 | 294-333 | max.300 |
| CHS-EPOXY® 498 | Epoxy resin modified with mono-functional reactive diluent | Civil engineering, potting and impregnation | 0,5- 0,7 | 4,8-5,1 | 196-208 | max.100 |
| CHS-EPOXY® 521 | Epoxy resin modified with mono-functional reactive diluent | Composites, potting, solventless coatings, civil engineering | 0,6-0,9 | 4,85-5,1 | 196-206 | max.100 |
| CHS-EPOXY® 531 | Epoxy resin modified with bi-functional reactive diluent | Composites, solventless coatings and impregnations, construction (bonding agent for mortar, concrete and food industry compositions) | 1,5-2,3 | 5,5-5,7 | 175-182 | max.100 |
| Produkt | Popis | Na2CO3 | Chloridy Cl | Fe | SO4 2 | PO4 3 | Těžké kovy Pb |
|---|---|---|---|---|---|---|---|
| NaOH – tekutý | Čirá, bezbarvá kapalina | < 0,5 | < 50 | < 5 | - | - | - |
| NaOH – pecičky | Bílé, silně hygroskopické pecičky čočkovitého tvaru, které mohou mít namodralý, nažloutlý nebo našedlý odstín. Na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 1 | < 200 | < 20 | < 100 | < 20 | < 20 |
| NaOH – pecičky | Bílé, silně hygroskopické pecičky čočkovitého tvaru, které mohou mít namodralý, nažloutlý nebo našedlý odstín. Na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 1 | < 80 | < 15 | < 40 | < 20 | < 20 |
| NaOH – pecičky | Bílé pecičky čočkovitého tvaru, silně hygroskopické, dobře rozpustné ve vodě, na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 0,5 | < 200 | < 10 | < 200 | - | < 20 |
| NaOH – pecičky | Bílé pecičky čočkovitého tvaru, silně hygroskopické, dobře rozpustné ve vodě, na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 0,4 | < 70 | < 8 | < 40 | < 3 | < 10 |
| Produkt | Popis | Na2CO3 | Chloridy Cl | Fe | SO4 2 | PO4 3 | Těžké kovy Pb |
|---|---|---|---|---|---|---|---|
| NaOH – tekutý | Čirá, bezbarvá kapalina | < 0,5 | < 50 | < 5 | - | - | - |
| NaOH – pecičky | Bílé, silně hygroskopické pecičky čočkovitého tvaru, které mohou mít namodralý, nažloutlý nebo našedlý odstín. Na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 1 | < 200 | < 20 | < 100 | < 20 | < 20 |
| NaOH – pecičky | Bílé, silně hygroskopické pecičky čočkovitého tvaru, které mohou mít namodralý, nažloutlý nebo našedlý odstín. Na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 1 | < 80 | < 15 | < 40 | < 20 | < 20 |
| NaOH – pecičky | Bílé pecičky čočkovitého tvaru, silně hygroskopické, dobře rozpustné ve vodě, na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 0,5 | < 200 | < 10 | < 200 | - | < 20 |
| NaOH – pecičky | Bílé pecičky čočkovitého tvaru, silně hygroskopické, dobře rozpustné ve vodě, na vzduchu absorbující CO2 a vzdušnou vlhkost. | < 0,4 | < 70 | < 8 | < 40 | < 3 | < 10 |
Ucelenou nabídku produktů naleznete také v produktovém katalogu (PDF).
Pokud požadujete podrobné informace o výrobcích, neváhejte nás kontaktovat.
